2.1 Step 1: Get the mast holder ready
2. How To Get Started
For a best possible image quality we
recommend fixing the Roundshot
Livecam to a solid metal mast.
The mast should not be too high so
that potential vibrations from wind
can be avoided.
The diameter of the camera socket is
80mm. The inside diameter of a mast
should therefore be at least 80mm.
Make sure that there is enough space
underneath the camera socket for
the waterproof cables (for power and
ethernet) – at least 300mm.
Drill 3 screws (M6) through the mast
through which the camera can be fixed
and any lateral movement can be
avoided.
Instruction Manual Roundshot Livecam D2 HD - version 4.04 – May 2012 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
page 7