2.5.2 Optimise sharpness
The sharpness is set manually on the lens.
Open the f-stop lever on the camera and open the aperture to
f=2.8 or f=4.0. This is necessary to allow the best possible light
reading and most sensitive sharpness correction.
Now zoom on the area of the image for which you would like to optimise sharpness.
Then create a scan at highest resolution (1x1):
2.5 Step 5: Configure the Roundshot Livecam D2 HD (continued)
F-stop lever
To adjust the f-stop:
Loosen the screw,
change the f-stop of
the lens with the
lever and fasten the
screw again.
Instruction Manual Roundshot Livecam D2 HD - version 4.04 – May 2012 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
page 24