Press the “Parameter” button to go
to the “Parameter” menu.
2.5.1 Framing the image (continued)
The starting position of the camera can be changed in two ways:
- By turning the camera in its camera mast
- By adjusting the image format parameters in the “Parameter” menu
Activate “Start angle” and enter an angle
between 1° and 359°.
The camera will move from the parking position
by the selected angle clockwise to a new
position for image taking.
For high altitude installations and for cameras in difficult weather
conditions it is advisable to define a parking position of the camera away
from the weather (for example against a wall).
Instead of turning the camera in its camera mast it is also possible to activate
“Parking position angle” and turn the camera to a different parking position.
Activate “Pre-angle” and enter 40° or 50°. This allows a smoother start/end exposure
as the camera already scans a few degrees before the actual image-taking.
Create a test scan by pressing “Start”. Adjust the parameters if necessary.
2.5 Step 5: Configure the Roundshot Livecam D2 HD (continued)
Select the “Camera parameters”
tab.
Instruction Manual Roundshot Livecam D2 HD - version 4.04 – May 2012 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
page 21