•
Install the Roundshot Livecam D2 software by double-clicking the installer located
in C:\software\1_Roundshot Livecam capture software. Select the 32bit or the 64bit
installer according to your operating system.
The program set-up will start automatically and the software will be installed in the
following directory:
C:\Program Files\Seitz\Digital3
Follow the installation procedures. When the installation is successfully completed,
you will be asked to restart the computer.
•
Setup the network properties of the computer:
•
Case1: Direct PC to camera connection
2.3 Step 3: Prepare the computer (continued)
If the camera is connected directly to the
computer select a fixed IP address. By default
the camera IP is 10.0.0.80. So the computer IP
can be set to 10.0.0.10 and the subnet mask to
255.0.0.0.
This case is only applicable when the
computer is connected to internet via
Wireless or 2G/3G network.
•
Case2: Camera and PC connected through a network
If the camera and the computer are connected
through a network select the option “Obtain
and IP address automatically”.
The computer will get an IP address within the
range defined in the router. For example
192.168.1.20.
To establish the connection to the camera the
IP address of the camera needs to be changed
to and IP within this same range. In this
example 192.168.1.80.
More details on how to change the camera IP
address will be presented in the next sections
Instruction Manual Roundshot Livecam D2 HD - version 4.04 – May 2012 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
page 10