4.2 Camera problem shooting (continued)
Problem
Possible root causes
Solutions
The images
are not
correctly
framed
The zoom position on the lens
was modified
The camera‘s orientation in the
mast was changed
The camera start angle was
modified
The digital crop function was
activated
•
Check whether the focal length in the
software corresponds to the marking on
the lens; go back to chapter 2.6.1 to
frame the image
•
Make sure that the camera position in
the mast is correct and adjust if
necessary
•
Check the setting for “Start angle” in
Format/Degrees/Options
•
Check if the “Digital crop” function in
Format/Degrees/Options is set at the
correct value
Instruction Manual Roundshot Livecam D2 HD - version 4.04 – May 2012 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch
page 65