manualshive.com logo in svg

rotork Schischek InMax, Manual

Looking for a user manual for your rotork Schischek InMax product? Look no further! Download the comprehensive manual for the InMax absolutely free from our website. Explore the detailed instructions and get the most out of your device. Simply visit manualshive.com to access your user manual instantly!

Share
Download
background image

6

Operation

 DANGER

Electric shock and risk of explosion

If the rotary drive has not been earthed (PE), there is a risk of electric shock if
a voltage is incorrectly applied to the housing. If the rotary drive is not at-
tached to the potential equaliser (PA), there is a risk of electric shock and ex-
plosion due to static charge in the housing.

1. Before commissioning the rotary drive, please ensure it is correctly earthed

(PE).

2. Before commissioning the rotary drive, please ensure it is correctly connec-

ted to the potential equaliser (PA).

 DANGER

Risk of explosion

In explosive atmospheres, human error can result in an explosion.

1. Make sure the type of rotary drive being used meets your requirements for

the explosion protection area. You can find this information on the rotary
drive label. 
ExMax: ATEX Zone 1, 2, 21, 22; 
RedMax: ATEX Zone 2, 22; 
InMax: not suitable for explosion protection area!

2. As far as possible, avoid working in an explosive atmosphere.

3. Switch off any power to the rotary drive before carrying out work in an ex-

plosive atmosphere.

4. Make sure that installation and connection work is only carried out by ap-

propriately trained specialist personnel.

6 | Operation

206

Translation of the original installation guide · Version 1.0 · 2021-05-27

Summary of Contents for Schischek InMax







































































































































































































































Reviews:

No comments

Related manuals for Schischek InMax

National Instruments NI 9502 Getting Started preview
NI 9502
Brand: National Instruments Pages: 29
QPS Que! USB 2/1.1 Quick Install Manual preview
Que! USB 2/1.1
Brand: QPS Pages: 16
Moons' M2 Series Quick Setup Manual Manual preview
M2 Series
Brand: Moons' Pages: 35
MRMC MRMC-1120-02 Quick Start Manual preview
MRMC-1120-02
Brand: MRMC Pages: 20
Kobalt 437513 Manual preview
437513
Brand: Kobalt Pages: 95
Knightsbridge 24DC100A Installation & Maintenance Manual preview
24DC100A
Brand: Knightsbridge Pages: 4
Indel GIN-SAC4 Series Hardware User Manual preview
GIN-SAC4 Series
Brand: Indel Pages: 94
LS iC5 Series Easy Start Manual preview
iC5 Series
Brand: LS Pages: 15
Ridder RW140 Product Manual preview
RW140
Brand: Ridder Pages: 52
Danfoss AME 435 QM Operating Manual preview
AME 435 QM
Brand: Danfoss Pages: 12
Melec ADB-2640U Instruction Manual preview
ADB-2640U
Brand: Melec Pages: 42
YASKAWA SGD7S-1R9D Product Manual preview
SGD7S-1R9D
Brand: YASKAWA Pages: 603
Magnetek Elevator HPV1000 Series Start Manual preview
HPV1000 Series
Brand: Magnetek Elevator Pages: 7
YASKAWA SI-EN3/V Technical Manual preview
SI-EN3/V
Brand: YASKAWA Pages: 62
Panasonic CF-VCW282U Operating Instructions Manual preview
CF-VCW282U
Brand: Panasonic Pages: 40
Unitek Classic P3 400/450-15 Manual preview
Classic P3 400/450-15
Brand: Unitek Pages: 26
Unitek Classic P3 400/450-240 Manual preview
Classic P3 400/450-240
Brand: Unitek Pages: 34
JVC MC-D207U Instructions Manual preview
MC-D207U
Brand: JVC Pages: 8

Brands by name

Popular brands

Load more brands