rotork Schischek InMax Manual Download Page 221

Page: 221 / 230

Disposal

Recycle any dismantled/defective components:

• Scrap any metal components.

• Take all plastic components to be recycled.

• Sort all other components by material and dispose of these in accordance with local spe-

cifications.

NOTICE

Environmental risk through incorrect disposal

Incorrect disposal can result in environmental risks.

1. Always use approved specialist companies for the disposal of electronic

waste, lubricants and other auxiliary materials.

2. In case of any doubt, consult your local authority or a specialist disposal

company regarding environmentally friendly disposal options.

3. When disposing of equipment and auxiliary materials (e.g. oils, fats),

please also refer to the relevant manufacturer’s information, in particular
the safety data sheet.

9 | Uninstalling, decommissioning, disposal

Translation of the original installation guide · Version 1.0 · 2021-05-27

221

Summary of Contents for Schischek InMax







































































































































































































































Search results

Summary of Contents for Schischek InMax

Reviews:

Related manuals for Schischek InMax

Brands by name

Popular brands

rotork Schischek InMax, Manual

Search results

Summary of Contents for Schischek InMax

Reviews:

Related manuals for Schischek InMax

Brands by name

Popular brands