manualshive.com logo in svg

rotork Schischek InMax, Manual

Looking for a user manual for your rotork Schischek InMax product? Look no further! Download the comprehensive manual for the InMax absolutely free from our website. Explore the detailed instructions and get the most out of your device. Simply visit manualshive.com to access your user manual instantly!

Share
Download
background image

 CAUTION

Impact and tripping hazard

If the rotary drive is not positioned carefully, it can pose an impact and trip-
ping hazard.

1. As far as possible, please avoid installing the rotary drive near to where

people will be walking or working.

2. Position the rotary drive to avoid any risk of tripping or head impact.

3. If necessary, provide warning indicators or padding around any potential

impact points.

 WARNING

Risk of crushing and impact

If the rotary drive is started up unexpectedly, crushing injuries can be caused
by the connected assemblies.

1. Potential crushing points should be considered in the integrator’s risk as-

sessment.

2. Before beginning work on the rotary drive, ensure the power is switched

off to prevent it being started unexpectedly.

3. Make sure the rotary drive is installed correctly.

4. Check that the drive fits the adaptation/valve.

 WARNING

Danger due to incorrectly integrated rotary drives

1. Potential hazards arising due to the rotary drive must be taken into ac-

count in your risk assessment for the overall machine. Bear in mind any
crushing points associated with your installation setting.

2. Only use the rotary drive as intended in accordance with this installation

guide.

3. Make sure the rotary drive meets your requirements: 

environmental conditions such as temperature, atmosphere, protection
against corrosion;
drive torque;
necessary travel speeds/runtimes;
reset function;
activation;

5 | Installation and commissioning

192

Translation of the original installation guide · Version 1.0 · 2021-05-27

Summary of Contents for Schischek InMax







































































































































































































































Reviews:

No comments

Related manuals for Schischek InMax

Tandon TM 100 Operating & Service Manual preview
TM 100
Brand: Tandon Pages: 13
GFA 10005218 10012 Installation Instructions Manual preview
10005218 10012
Brand: GFA Pages: 24
ABB FBVi-2U4-4T User Manual preview
FBVi-2U4-4T
Brand: ABB Pages: 102
ABB ACS880-307LC Hardware Manual preview
ACS880-307LC
Brand: ABB Pages: 106
ABB DMP 112-2L Operating And Maintenance Instructions Manual preview
DMP 112-2L
Brand: ABB Pages: 52
ABB ACS880-607LC Hardware Manual preview
ACS880-607LC
Brand: ABB Pages: 108
ABB DCS800 Hardware Manual preview
DCS800
Brand: ABB Pages: 134
ABB DCS880 series Service Manual preview
DCS880 series
Brand: ABB Pages: 128
ABB HD4-HXA Installation And Service Information preview
HD4-HXA
Brand: ABB Pages: 32
ABB InRouter 615 Commissioning Manual preview
InRouter 615
Brand: ABB Pages: 13
ABB ACS880-37LC Hardware Manual preview
ACS880-37LC
Brand: ABB Pages: 202
ABB Johnson Controls AYK550-UH User Manual preview
Johnson Controls AYK550-UH
Brand: ABB Pages: 348
ABB DCS800 Installation Manual preview
DCS800
Brand: ABB Pages: 70
ABB NETA-21 User Manual preview
NETA-21
Brand: ABB Pages: 196
Samsung SD-616T (Korean) User Manual preview
SD-616T
Brand: Samsung Pages: 2
Samsung SD-816 (Korean) User Manual preview
SD-816
Brand: Samsung Pages: 9
Sony DVDirect VRD-MC3 Operating Instructions Manual preview
DVDirect VRD-MC3
Brand: Sony Pages: 88
Siemens 3VT9100-3M.00 Operating Instructions Manual preview
3VT9100-3M.00
Brand: Siemens Pages: 10

Brands by name

Popular brands

Load more brands