Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 50

Page: 50 / 92



April 2015



IMO_374_EN_v1

Roto Patio Fold

Subject to change.

Installation

Sash

Installing the sash hinge-bearing

Fold together the folding sash according to the
diagram , carry out the drillings for the sash hinge-
bearing, then for the hinge-fixing insert and the
support brackets with drilling jig (643365), not dep.

Push in the sash hinge-bearing (not dep.).

Screw-fix the sash hinge-bearing with Euro screws.

Position the cover plate.

Secure the cover plate with countersunk screw.

NOTE!

Seal the profile holes for the outer frame
hinge-bearing and hinge-fixing inserts with
suitable sealing compound to prevent the
ingress of water.

Summary of Contents for Patio Fold





























































































Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands

Roto Patio Fold, Installation, Maintenance And Operation Instructions

Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands