manualshive.com logo in svg

Roto Patio Fold, Installation, Maintenance And Operation Instructions, Page: 75 / 92

Share
Download
Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 75

Subject to change.  

Roto Patio Fold

 

IMO_374_EN_v1

 

 

April 2015

 

 

75

Adjustment

Bogie / hinge

Gasket compression, height / lateral adjustment

11

Gasket-compression adjustment of the sashes 

via bogie

1.

Remove the cover cap.

2.

Release the support bracket on the threaded bolt. 

Allen key size 6 and 

 

open-end spanner size 17.

3.

Set the gasket compression.

4.

Tighten the screws.

+3.5

-2.5

Height adjustment of the sashes via bogie

1.

Remove the cover cap.

2.

Adjust the bogie height by turning the threaded bolt 

with the 4 mm Allen key.

+3.0

–3.0

Lateral adjustment of the shadow gap via the 
hinge

1.

Open the sash resp. element.

2.

Turn the cylinder screw in the middle with a 4 mm 

Allen key for adjusting the hinge. 

4 mm Allen key 

 

Turning 180° = 0.5 mm
Turning 360° = 1.0 mm

Summary of Contents for Patio Fold





























































































Reviews:

No comments