Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 25

Page: 25 / 92

Subject to change.

Roto Patio Fold

IMO_374_EN_v1



April 2015



Information on the product

Possible combinations:

Top-running frame

Kombinationsmöglichkeit 1

- Untenlaufend

- Führungsschiene oben

- Laufschiene unten

Kombinationsmöglichkeit 2

- Obenlaufend

- Laufschiene oben

- Führungsschiene unten

Kombinationsmöglichkeit 3

- Untenlaufend

- Führungsschiene oben

- Komfort-Bodenschwelle unten

Kombinationsmöglichkeit 1

- Untenlaufend

- Führungsschiene oben

- Laufschiene unten

Kombinationsmöglichkeit 2

- Obenlaufend

- Laufschiene oben

- Führungsschiene unten

Kombinationsmöglichkeit 3

- Untenlaufend

- Führungsschiene oben

- Komfort-Bodenschwelle unten

Combination possibility 2



Top running



Roller track, top



Guide track, bottom

max. TEFF

NOTE!

In conjunction with this document, the follow-

ing documents for the installation of Turn-Only

and Tilt&Turn hardware apply:



IMO_72 (

Roto AL 540 Tilt&Turn sash)



IMO_20 (Roto AL 540 Turn-Only sash)



CTL_14 (Roto AL catalogue)

Roto Patio S flush-encased gearboxes can be used
depending on the profile.

Summary of Contents for Patio Fold





























































































Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands

Roto Patio Fold, Installation, Maintenance And Operation Instructions

Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands