Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 57

Page: 57 / 92

Subject to change.

Roto Patio Fold

IMO_374_EN_v1



April 2015



Installation

Frame

Installing contour-milled frame

Cut the enhanced threshold to the required length,
making sure that the cut edge is clean.

Cut the TB adapter profile (548528) to the width of
the profile.

Insert the cut TB adapter profile (548528).

Pull off the adhesive film on the cover cap before
placing it onto the threshold.

Secure the cover cap.

NOTE!

The screws shown are in the misc. small
components pack of the enhanced threshold.

Seal the surface on the threshold before installing
the threshold bracket with a suitable sealing
compound

to prevent the ingress of water.

Summary of Contents for Patio Fold





























































































Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands

Roto Patio Fold, Installation, Maintenance And Operation Instructions

Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands