12
April 2015
IMO_374_EN_v1
Roto Patio Fold
Subject to change.
Security
Stipulated use
Turn-Only and Tilt&Turn hardware
Turn-Only and Tilt&Turn hardware as covered by this definition is one-hand-
operation hardware, Turn-Only and Tilt&Turn hardware for windows and
balcony doors in building construction. This is used to enable windows and
balcony-door sashes into a turning position by operating a ‘hand-lever’
(handle ) or into a limited tilting position in the case of the scissors (sash-stay)
version. Turn-Only and Tilt&Turn hardware is used on vertically installed
windows and balcony doors made of aluminium.
Turn-Only and Tilt&Turn
hardware as covered by this definition, locks window and balcony door
sashes or enables various ventilating positions. When closing, the gasket
counter force must be overcome as a rule.
Correct use also includes adhering to all the specifications in the product-
specific documents, such as:
These installation, maintenance and operation instructions
Product catalogues
Information and specifications of the profile manufacturer (e.g. light metal
profiles etc.)
The relevant directives TBDK, VHBH and VHBE of the Quality Assurance
Association: Locks and Hardware (Gütegemeinschaft Schlösser und
Beschläge
e. V.)
The valid national laws and directives
Any type of use that goes beyond or differs from the defined correct use
shall be regarded as misuse.
WARNING!
Danger from misuse!
Misuse and incorrect installation of hardware can result in
hazardous situations.
Never use hardware combinations that have not been approved
by the hardware manufacturer.
Never use accessories that are not original products or that have
not been approved by the hardware manufacturer.
