Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 58

Page: 58 / 92



April 2015



IMO_374_EN_v1

Roto Patio Fold

Subject to change.

Installation

Frame

Installing contour-milled frame

Secure the threshold bracket.

NOTE!

The screws shown are in the misc. small
components pack of the enhanced threshold.

Recommendation: Self-tapping screws (choice on site)

ISO 7050 – ST 4.2 x ... – C – Z, stainless steel A2

Seal the gap between the threshold bracket and
cover cap with a suitable sealing compound to
prevent

the ingress of water.

Fix the threshold bracket with self-tapping screws

4.2 x 25.

NOTE!

The screws shown are in the misc. small
components pack of the enhanced threshold.

NOTE!

When ordering profile-specific threshold
brackets, pay attention to the screw
positions

(see red identifier) to the corner

connector of the enhanced threshold.

Summary of Contents for Patio Fold





























































































Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands

Roto Patio Fold, Installation, Maintenance And Operation Instructions

Search results

Summary of Contents for Patio Fold

Reviews:

Related manuals for Patio Fold

Brands by name

Popular brands