manualshive.com logo in svg

Roto Patio Fold, Installation, Maintenance And Operation Instructions, Page: 10 / 92

Share
Download
Roto Patio Fold Installation, Maintenance And Operation Instructions Download Page 10

10

 

 

April 2015

 

 

IMO_374_EN_v1

 

Roto Patio Fold 

Subject to change.

General information

Explanation of the safety instruction symbols

In this instructions, safety information is indicated by a symbol. The safety 
information is introduced by a key word that indicates the severity of the 
danger.

DANGER!

This symbol in conjunction with the signal word indicates an 
imminently  hazardous situation, which could result in death or 
serious  damage to health if it is not avoided.

WARNING!

This symbol in conjunction with the signal word indicates a 
potentially  dangerous situation, which could result in death or 
serious  damage to health if it is not avoided.

CAUTION!

This symbol in conjunction with the signal word indicates a 
potentially  dangerous situation, which may lead to minor or light 
injuries if it is not avoided.

NOTE!

This symbol in conjunction with the signal word indicates a 
potentially  dangerous situation, which may lead to property or 
environ mental damage if it is not avoided.

Summary of Contents for Patio Fold





























































































Reviews:

No comments