Subject to change.
Roto E-Tec DoorDrive
IMO_294_EN_v0
May 2013
9
General information
Limitation of liability
All the details and information in this document have been compiled based
on the relevant standards and regulations, and state of the art development,
along with many years of knowledge and experience.
The hardware manufacturer shall not accept liability for damage resulting
from:
– Failure to comply with this document and all product-specific docu-
ments and related applicable directives (refer to the chapters on Safety
and Stipulated Use).
– Non-stipulated use/misuse
(refer to the chapters on Safety and Stipulated Use).
– Inadequate invitation to tender, failure to comply with the installation
instructions.
– Forced opening / closing of the door.
– Increased soiling.
Claims by third parties against the hardware manufacturer on the ground of
damages resulting from misuse or failure to follow the instruction obligation
on the part of the hardware dealer, the door manufacturer, and of the
specialised dealer or the builder are transferred accordingly.
The undertakings agreed in the delivery contract, the general terms and
conditions, the hardware manufacturer’s delivery conditions, and the legal
regulations applicable at the time of concluding a contract are effective.
The warranty covers original Roto components only.
Subject to technical modifications conducted as part of the improvement
process for performance characteristics and further development.
Summary of Contents for E-Tec DoorDrive
Page 51: ......
