Rotex RBLQ011AA6V3 Operation Manual Download Page 31

Page: 31 / 176

R(D/B)LQ011~0W1

Unit for air to water heat pump system and options

4PW53150-1

Operation manual

Tips and tricks

Programming the next day(s)

After confirming the programmed actions of a specific day (i.e. after
pressing the

button for 5 seconds), press the

button once. You

can now select another day by using the

and

buttons

and restart consulting and programming.

Copying programmed actions to next day

In heating/cooling program it is possible to copy all programmed
actions of a specific day to the next day (e.g. copy all programmed
actions from "

" to "

").

To copy programmed actions to the next day, proceed as follows:

Press the

button.

The actual mode is blinking.

Use the

and

buttons to select the mode you want

to program.

The selected mode is blinking.

You can leave programming by pressing the

button.

Press the

button to confirm the selected mode.

The actual day is blinking.

Select the day you would like to copy to the next day by means
of the

and

buttons.

The selected day is blinking.

You can return to step 2 by pressing the

button.

Press the

and

buttons simultaneously for 5 seconds.

After 5 seconds the display will show the next day (e.g. "

" if

" was selected first). This indicates that the day has been

copied.

You can return to step 2 by pressing the

button.

Deleting one or more programmed actions

Deleting one or more programmed actions is done at the same time
as storing the programmed actions.

When all actions for one day have been programmed, make sure that
the display shows the highest action number you would like to save.
By pressing the

button for 5 seconds, you store all actions except

those with a higher action number than the one that is displayed.

E.g. when the

button is pressed when action number 3 is

displayed, actions 1, 2 and 3 are stored but 4 and 5 are deleted.

Deleting a mode

Press the

button.

The actual mode is blinking.

Use the

and

buttons to select the mode you want

to delete (quiet mode

, booster heating

or domestic water

heating

The selected mode is blinking.

Press the

and

button simultaneously for 5 seconds to

delete the selected mode.

Deleting a day of the week (cooling or heating mode)

Use the

button to select the operation mode (cooling or

heating) you want to delete.

Press the

button.

The actual mode is blinking.

Press the

button to confirm the selected mode.

The actual day is blinking.

Select the day you would like to delete by means of the

and

buttons.

The selected day is blinking.

Press the

and

button simultaneously for 5 seconds to

delete the selected day.

PERATING

THE

REMOTE

ALARM

OPTION

The optional EKRP1HB remote alarm address card can be used to
remotely monitor your system. This address card offers 2 voltage free
outputs.

■

Output 1 = alarm output: this output will be enabled when your
unit is in error condition.

■

Output 2 = ON/OFF output: this output will be enabled when
your unit is in ON condition.

For more details about the wiring connections of this option, refer to
the wiring diagram of the unit.

IELD

SETTINGS

The unit should be configured by the installer to match the installation
environment (outdoor climate, installed options, etc.) and user
demand. Thereto, a number of so called field settings are available.
These field settings are accessible and programmable through the
user interface.

Each field setting is assigned a 3-digit number or code, for example
[5-03], which is indicated on the user interface display. The first digit
[5] indicates the 'first code' or field setting group. The second and
third digit [03] together indicate the 'second code'.

A list of all field settings and default values is given under "Field
settings table" on page 16. In this same list, we provided for 2
columns to register the date and value of altered field settings at
variance with the default value.

A detailed description of each field setting is given under "Detailed
description" on page 11.

Procedure

To change one or more field settings, proceed as follows.

Press the

button for a minimum of 5 seconds to enter FIELD

SET MODE.
The

icon (3) will be displayed. The current selected field

setting code is indicated

;

(2), with the set value displayed to

the right

(1).