Rossum Electro-Music MOB OF EMUS, Operation Manual

Page: 22 / 42

22 |
8. Hex Mode
Hex Mode provides a macro
control layer that allows you
to control all of Mob of Emus’
channels simultaneously (while, in
most cases, maintaining the relationships of
each channel’s independent programming).
The Hex button toggles Hex Mode on and
off. The associated LED lights steadily to
indicate Hex Mode is active.
NOTE:
While one of the Options Modes
is latched on, the LED instead flashes
to indicate that. When an Option Mode is
unlatched, the LED will return to indicating the
Hex Mode state.
While in Hex Mode, the real-time controls will
offset the individual channels’ values for the
following parameters (adding or subtracting
from them as appropriate):
Frequency
Octave
Phase
Variation
DC Offset
While in Hex Mode, the real-time controls will
override
the individual channels’ values for
the following parameters:
Wave (unless “Ø” is selected)
Harmonic Series
(sets all channels’ Harmonic
#)
Mixed Mode
When Hex mode is enabled
and
one or more
channels are selected, all parameter edits
will affect the selected channels, not the Hex
layer. However, Mob of Emus will continue to
apply the Hex layer offsets and modifications,
allowing you to make edits to the individual
channels while hearing the effects of the Hex
Mode offsets.
Additional Hex Button functions
The Hex button is also used for the following
functions:
Select or deselect all channels Double-click
the Hex button to select all six channels. If all
channels are selected, double-clicking the
Hex button will deselect all of them.
Toggle Output Viewer Clicking and briefly
holding the Hex button will toggle the
Channel Selection LEDs Output Viewer on
and off.
Latch Option Mode Clicking the Hex button
while an Option Mode is momentarily
selected will latch the Option Mode on.
Unlatch Option Mode Clicking the Hex
button while an Option Mode is latched will
unlatch the Option Mode.