|
33
Button 5: Restore all Presets from a WAV
file.
This function allows you to restore all of
your saved Presets from a WAV file. This file
might be an archive you previously recorded,
a file from some other user sharing his or
her presets, or a download from our web
site containing the factory example Presets
(which you may have overwritten but want
back).
Here’s how:
NOTE:
Before starting, be sure to check
out the
“Hints for Playing Back WAV Files”
in the previous chapter.
ANOTHER NOTE:
This function will
overwrite (i.e., delete) all of the Presets in
your module. So be careful. You may want to
archive your current contents using Function
4 above before doing this, just in case you
change your mind about whether or not you
might want them later.
1.
Patch the output of your WAV player to
the
FREQ/6
CV Input. Again, a regular
Eurorack patch cord works fine.
2.
Enter the Restore function by pressing and
holding
Tap
+
Hex
+
Option
and then the
Preset 5
button. The
Preset 5
and
Hex
LEDs will flash. (If you need to change
your mind at this point, press the
Hex
button to return to normal operation.)
3.
Press the
Preset 5
button again to
proceed.
Channel Selector
LEDs 1 and 2
will light and the
Preset 5
LED will double-
flash to indicate Mob of Emus is waiting
for audio.
4.
Play the audio backup WAV file. The
Channel Selector
LEDs will act as a
progress indicator. The six LEDs will light in
sequence as the data is loaded. (Again, the
transfer may take a while, so be patient for
the LEDs to light.)
5.
If all goes well, the user data will be
received and all six LEDs will be lit. Press
Hex
to return to normal operation.
If the transfer wasn’t successful, an error
code will be displayed in the Channel
Selector LEDs. Press Hex to return to
normal operation. If you continue to have
a problem, get in touch via our web site
(
http://www.rossum-electro.com/support/
supportrequest- form/
) and we’ll get it
handled.
IMPORTANT NOTE:
If the transfer wasn’t
successful (e.g., the received data was
corrupt, damaged, or not understood), Mob of
Emus’ current
Presets
will remain intact, and
will not be erased or overwritten.
Preset 6: Transfer Menu.
This function allows
you to save and restore individual Presets to
and from WAV files. It’s ideal for exchanging
individual content with others or archiving
only selected Presets.
The actual process of saving and restoring
is very similar to the mass archiving and
restoring described above.
IMPORTANT NOTE:
When individual Presets
are saved, their button location is not
saved with them. This allows you to load a
saved Preset into any button location you
prefer.
Here’s how:
1.
Press and hold
Tap
+
Hex
+
Option
and
then the
Preset 6
button to enter the
Transfer Menu. The
Preset
buttons will
“chase” and the
Hex
button will flash. You
will then have the following options:
Click a
Preset
button to transmit one of
Preset 1–6.
Double-click a
Preset
button to transmit
one of Preset 7–12.
Click and hold a
Preset
button for 3
seconds to receive one of Preset 1–6.
Double-click and hold a
Preset
button for
3 seconds to receive one of Preset 7–12.
Click the
Hex
button to exit the Transfer
Menu.
Summary of Contents for MOB OF EMUS
Page 5: ...5 3 Overview...
Page 42: ...42...
