10
|
5. Make Some Noise!
The quickest way to hear some of what Mob
of Emus can do is to check out the Presets
that come pre-loaded from the factory. Refer
to
Chapter 16
for details about the intended
effect of each preset.
Select a preset by clicking or double-clicking
the desired button in the Preset section. To
load Preset 1–6, click the appropriate button.
The associated LED will light. To select
7–12, double-click the desired button. The
associated LED will flash. Click the button
again to deselect the preset.
Once you’ve selected a preset, either
monitor the outputs (if it’s an audio preset)
or patch the outputs to modulation inputs
on additional modules (as suggested for
the preset in Chapter 16). In either case, try
adjusting some paramaters and see what
happens.
A TIP:
If you start playing with a preset and
get lost to the point that you’re not sure
what’s going on (not that that’s necessarily a
bad thing), try deselecting the preset and then
selecting it again to get back to its initial state.
When you’ve played for a while, read the rest
of this manual. You’ll be glad you did.
Summary of Contents for MOB OF EMUS
Page 5: ...5 3 Overview...
Page 42: ...42...
