background image

VENUE D-Show Hard Drive

1

VENUE D-Show Hard Drive

For VENUE FOH Rack

Replacing a Hard Drive

The following procedure outlines the steps for removing and 
replacing the hard drive in the VENUE FOH Rack.

To remove the FOH Rack Hard Drive:

1  

Power down the FOH Rack and disconnect all power, audio 

and cables from the unit.

2  

Using a #1 Phillips screwdriver, remove the 4 type P (M3 x 6 

flat head) screws that secure the hard drive bay to the FOH 
Rack.

3  

Slide out the hard drive bay from the FOH Rack.

4  

The IDE cable and the 4-pin power cable are hot-glued in 

place. Use a small flat blade screwdriver or X-acto knife to 
carefully remove the bead of glue holding each connector in 
place.

5  

Disconnect the IDE cable and power cable, while taking 

note of the cable plug orientation for each cable.

VENUE FOH Rack hard drive

If you are using a power screwdriver be sure to use the low-
est torque setting to prevent damage to screws or inserts.

Removing the hard drive bay from the FOH Rack

Sliding the hard drive bay from the FOH Rack

Disconnecting cables from the hard drive

Отзывы: