![background image](http://html1.mh-extra.com/html/shaman/isl-10/isl-10_manual_1251707001.webp)
Shaman iSL-10 Smart Link Pedal
Article no.: 00039149
Precautions
1) Read these instructions before operating the unit.
2) Please heed all safety warnings and keep these instructions for future
reference. Follow all instructions.
4) Do not use this device near water or moisture.
5) Clean only with dry cloth.
6) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus that produce heat.
7) Only use attachments/accessories specified by the manufacturer.
8) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as liquid has
been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
9) Battery not included. Use high quality 9V block battery or 9V/DC adaptor
(accessory) for ultimate performance.
Specifications
Shaman iSL-10:
iOS/Android Smart Link Pedal
Controls:
Pedal Switch, Mix Control Input
LED Indicator:
On/Off
Connectors:
6.35mm Input jack, 2 x 6.35mm output jack L(mono)/R
Power Supply:
9 V DC: dry battery 9V type 6F22/9V or 9V/DC adapter
Current Draw:
12mA @ 9V/DC
Dimensions:
72 (W) x 115 (L) x 36/54 (H) mm
Weight:
260 g (battery not included)
DV 9V Input
The
Shaman iSL-10
is powered by 9V battery or 9V/DC net adapter (accessory, not
included). To install or replace the 9V battery open the battery compartment . Always
remember to unplug your guitar cords from the pedal to conserve battery life. Some
battery drain may take place when unit is plugged in, even if the unit is bypassed. If
you want to use a net adapter please note polarity. You have to use 2.1mm jack
(minus = inner contact), which is a common adapter for effect pedals.
1. INPUT Jack
This jack accepts input signals
coming from a guitar, some other
electric or electronic musical
instrument, or another effects unit.
2. + 3. OUTPUT jack L(mono)/R
Connect
this
jack
to
your
amplifier(s) or some other electric
or electronic musical instrument, or
effects unit.
4. Smart Link jack 3.5mm
Insert multiple 4-PIN audio cable
and connect with your iOS/Android
device (Send/Return)
5. Phones jack 3.5mm (stereo)
Insert stereo Headphones
6. Mix Control
Rotary control to adjust the input
signal
7. Pedal Switch
This switch turns the pedal ON/OFF
8. Status LED
When the LED is on, the iSL-10 pedal is active, otherwise the iSL-10 is in bypass
mode, the signal is unprocessed. The footswitch engages/disengages the pedal.
9. 9V/DC Input jack
Download your Recording-, Effect-, Jamming-, or Tuning-APP from iOS/Android
stores in internet . Run the APP on your iOS/Android device. When you switch on
the pedal, the input signal will be linked to your device and processed
(stereo/mono) according to the used APP. The signal will be returned to the pedal
and sent to the output jacks.
Musikhaus Kirstein GmbH
Bernbeurenerstr. 11 / 86956 Schongau / Germany
Phone: 0049-8861-909494-0 Fax: 0049-8861-909494-19