Ross Ultrix Acuity, Operation Manual, Page: 87 / 115

control to complete before executing the
normal function of the button.
• Replace — attach the custom control
instead of the normal action of the
button. When the control panel button
is pressed, the custom control is run. The
normal function of the button is not
executed.
5. Press Attach .
To Remove a Custom Control From a Panel
Button
1. Press HOME > Custom Controls > More >
Attach Macros .
2. Press Show List to show a list of the attached
custom controls ( On ).
Tip: Press Delete All Attachments to delete all the
attachments of custom controls to control panel buttons.
3. Use the Scroll list with Knob 3 knob to select
the custom control attachment that you
want to remove.
4. Press Delete Attachment .
Custom Control Shortcuts
Shortcuts for common custom control
commands can be mapped to custom control
panel buttons. This allows you to perform tasks,
such as recording and saving a custom control,
right from the control panel, without having to
use the menu system.
To Use The Shortcut Description Shortcut
1. Press and hold the
Bank button and all
the other custom
control buttons change
to bank select buttons.
2. Select the bank you
want and release both
buttons.
This shortcut
allows you to
select any custom
control bank
without assigning
each bank to a
custom control
button.
Bank
• Press and hold the Bank
button.
• Press Bank <<<.
This shortcut
allows you to
display the
previous set of
Bank X selection
buttons. This
button is only
visible when the
Bank button is
held.
Bank
<<<
To Use The Shortcut Description Shortcut
• Press and hold the Bank
button.
• Press Bank >>>.
This shortcut
allows you to
display the next
set of Bank X
selection buttons.
This button is only
visible when the
Bank button is
held.
Bank
>>>
• Press and hold the
Delete button.
• Press the button for the
custom control you want
to delete.
This shortcut
allows you to
delete a custom
control.
Delete
1. Press and hold the
Pause button. A series
of durations, in fields,
are shown on the
mnemonics for the
custom control bus, as
well as Hld w Popup
(Hold with a menu
popup), Hldw/o Popup
(Hold without a menu
popup), Hold for Run,
and Hold for Run A-Z.
2. Press the custom
control button below
the event to insert that
pause or hold into the
custom control. The
Hold for Run A-Z
buttons can only show
as many groups as
there are available
custom control buttons
on the bus.
This shortcut
allows you to
insert a pause or
hold into a
custom control
you are
recording,
without using the
menu system.
Pause
(Hold)
1. Press and hold the
Record button and
select the custom
control you want to
record to. Both buttons
flash red while
recording.
2. Press the Record
(Cancel) button again
to cancel the recording,
or the custom control
button you are
recording to (Save), to
save the recording.
This shortcut
allows you to
record a custom
control without
using the menu
system.
Record
Ultrix Acuity Operation Manual (v10.1) — Custom Controls • 87