•
PST
— source selected on the Preset bus
is recalled with the memory.
•
UX
— source selected on Utility bus X is
recalled with the memory.
•
Key X Xpt
— sources selected on the
Keyer buses are recalled with the
memory. Keyer parameters such as key
type, clip, and gain settings are always
recalled with a memory.
•
Key X State
— the on-air status of the
keyers are recalled with the memory.
•
Key X Type
— the key types selected for
the keyers are recalled with the memory.
•
Key SEL
— the selected key (
SEL
button)
on the Keyer module is recalled with the
memory.
•
Chroma Key
— the chroma key settings
are recalled with the memory. This is
useful for virtual set environments where
you want to recall different shots but not
change the chroma key settings with the
memory recall.
5.
Select how the Transition module is recalled
with the memory.
•
Run Auto Trans
— an auto transition
performed after a memory is recalled.
Remember to set up the transition in the
Transition module when you store the
memory so that the desired transition is
performed after the memory is recalled.
•
Next Trans Buttons
— the selection of
the Next Transition Select buttons is
recalled with the memory.
•
Transition Area
— the Transition
Parameter and Transition Type buttons,
but are recalled with the memory. The
Fader, Transition, or Next Transition
Select buttons are not recalled.
To Set Aux Bus Memory Attributes
1.
Press
HOME
>
Attributes
>
ME Attributes
.
Tip:
You can also press ATTRIB on the Effects Memory
module.
2.
Press
Aux Bus
.
3.
Use the
ME
knob to select the ME that you
want to set up the ME attributes for.
Tip:
The memory that you are currently setting the
attributes for is listed near the top left of the menu.
4.
Select the aux buses (
BnkXAuxY
) that you
want recalled with the memory.
To Set Custom Control Memory Attributes
1.
Press
HOME
>
Attributes
>
ME Attributes
.
Tip:
You can also press ATTRIB on the Effects Memory
module.
2.
Press
Custom Control
.
3.
Use the
ME
knob to select the ME that you
want to set up the ME attributes for.
Tip:
The memory that you are currently setting the
attributes for is listed near the top left of the menu.
4.
Use the
Bank
and
Macro
knobs to select the
custom control that you want to have play
after the memory is recalled.
5.
Press
Auto Run Custom Control
to include
the custom control with the memory.
To Set the Video Media-Store Attributes
1.
Press
HOME
>
Attributes
>
ME Attributes
.
Tip:
You can also press ATTRIB on the Effects Memory
module.
2.
Press
Video MediaStore
.
3.
Use the
ME
knob to select the ME that you
want to set up the ME attributes for.
Tip:
The memory that you are currently setting the
attributes for is listed near the top left of the menu.
4.
Select the Media-Store video channels that
you want to recall with the memory.
Note:
The Recall ME-Store option must be set to Attributes
to be able to not recall them with the memory.
To Set the Audio Media-Store Attributes
1.
Press
HOME
>
Attributes
>
ME Attributes
.
Tip:
You can also press ATTRIB on the Effects Memory
module.
2.
Press
Audio MediaStore
.
3.
Use the
ME
knob to select the ME that you
want to set up the ME attributes for.
Tip:
The memory that you are currently setting the
attributes for is listed near the top left of the menu.
4.
Select the Media-Store audio channels that
you want to recall with the memory.
Note:
The Recall ME-Store option must be set to Attributes
to be able to not recall them with the memory.
Ultrix Acuity Operation Manual (v10.1) — Memory Functions • 55