Note:
Registers marked as UHDTV1 (UHD) should not be
recalled when the switcher is operating in a SD/HD mode.
4.
Use the
From Disk
knob to select the item
you want to recall.
5.
Use the
To Switcher
knob to select the
location on the switcher to recall the item.
This is the individual custom control button
or memory register on the switcher.
6.
Press
Recall Item
.
Managing Setups Externally
The web interface of the frame allows you to
not only upgrade the software on the switcher,
but also to manage the setups you have stored
on the hard drive of the switcher. Using a
computer on the same sub-net as the frame, you
can browse to the frame, log in, and either
download or upload setups from or to the frame.
To Download a Setup To a Computer
1.
Open a web browser and navigate to the IP
address of the switcher. You are prompted
to enter a user name and password. The
defaults are
user
and
password
.
2.
Click
Files
>
Switcher Sets
.
Setups that have items stored in them are
shown as a hyperlink. Click
Refresh Table
if any changes to the setups you made from
the switcher do not appear in the table.
3.
Click on the setup that you want to
download.
The file is downloaded by your browser to
the default "downloads" folder on your
computer.
Tip:
You can delete the contents of a setup by selecting the
setup from the Set list and clicking Delete Set.
To Upload a Setup From a Computer
1.
Open a web browser and navigate to the IP
address of the switcher. You are prompted
to enter a user name and password. The
defaults are
user
and
password
.
2.
Click
Files
>
Switcher Sets
.
Setups that have items stored in them are
shown as a hyperlink. Click
Refresh Table
if any changes to the setups you made from
the switcher do not appear in the table.
3.
In the
Number
field, enter the 2-digit
number of the setup location that you want
to upload a setup to. This is the number that
appears in parenthesis after the setup name.
4.
Click
Choose File
and use the window to
select the setup file you want to upload.
5.
Click
Upload Set
.
Ultrix Acuity Operation Manual (v10.1) — Switcher Setups • 59