Ross Ultrix Acuity, Operation Manual, Page: 79 / 115

Description Command
Trigger a GPI.
•
Use the GPI knob to select the GPI
that you want to use.
GPI
Turn a GPI on or off.
•
Press GPI and use the GPI knob to
select the GPI that you want to
use.
• Press State and use the State
knob to select whether to turn the
GPI on (On or 1) or off (Off or 0).
GPI w/State
This command is not implemented at
this time.
HELP
Perform a key only auto transition on
the selected ME.
1.
Select the ME X that you want to
perform the transition on.
2. Select the Key X that you want to
transition.
KEYAUTO
Perform a key only cut transition on
the selected ME.
1.
Select the ME X that you want to
perform the transition on.
2. Select the Key X that you want to
transition.
KEYCUT
Turn shaped keying on or off for the
selected key.
1.
Select the ME X that you want set
the key for.
2. Select the Key X that you want to
change the state for.
3. Press State and use the State
knob to select whether the alpha
is shaped (On) or unshaped (Off).
KEYSHAPED
Returns whether a key is on-air or
off-air on an ME.
1.
Select the ME X and Key X for the
key you want to get the sate for.
KEYSTATE
Recall a switcher set.
1.
Press Disk and use the Disk knob
to select the location of the set
you want to recall.
2. Press Set, enter the name of the
set you want to recall, and press
Accept New Name.
LOADSET
Perform an auto transition on the
selected ME.
1.
Select the ME X(s) that you want
to perform the transition on.
MEAUTO
Perform a cut on the selected ME.
1.
Select the ME X(s) that you want
to perform the transition on.
MECUT
Description Command
Recall a memory.
1.
Select the ME X(s) that you want
to recall the memory on.
2. Press Memory and use the
Memory knob to select the
memory you want to recall.
MEM
Store a memory.
1.
Select the ME X(s) that you want
to store the memory on.
2. Press Memory and use the
Memory knob to select the
memory you want to store.
MEMSAVE
Enter a new mnemonic name for a
source.
1.
Select the type of source and use
the Src X knob to select the
source you want to name. You
may have to press the Src X to
have the knob appear.
2. Press Name, enter the name of
the set you want to store, and
press Accept New Name.
MNEM
Load a media item into a Media-Store.
1.
Press GS, GSA, or ME and use the
GS, GSA, or ME knob to select the
Media-Store you want to load the
media item on.
2. Press Channel and use the
Channel knob to select the
channel of the selected Media
-Store that you want to load a
media item on.
3. Press Media Number and use
the Media Number knob to
select the media item you want
to load.
MS
Play the current media item loaded in
the selected Media-Store.
1.
Press GS, GSA, or ME and use the
GS, GSA, or ME knob to select the
Media-Store you want to play the
media item on.
2. Press Channel and use the
Channel knob to select the
channel of the selected Media
-Store that you want to play the
media item on.
MSPLAY
Ultrix Acuity Operation Manual (v10.1) — Custom Controls • 79