Tip:
You can press Enter on the keyboard to transition to the next clip, instead of clicking TAKE.
•
Loop
— the clip is looped when it reaches the end of the clip in ON-AIR mode. You must click
TAKE
to transition to the next clip.
7.
Set a different transition length (
TRANS
) for the transition between the current clip and next by
right-clicking on the clip and selecting
Set Transition...
.
Note:
The dissolve transitions (MIX) require two channel transports (PGM/PVW) to be able to transition from one channel to the other
(one clip to the other). The dissolve is applied between the two clips.
•
CUT
— a cut is performed between the clips.
•
0.05 MIX
— a 5-frame dissolve is performed between clips.
•
0.10 MIX
— a 10-frame dissolve is performed between clips.
•
0.15 MIX
— a 15-frame dissolve is performed between clips.
•
0.20 MIX
— a 20-frame dissolve is performed between clips.
•
1.00 MIX
— a 1-second dissolve is performed between clips.
8.
Click
Save
to save the changes to the playlist.
Tip:
Click Save and AIR List to save the changes to the Play List and load the Play List into the selected channel transport.
To Air a Play List
Take the Play List on-air to play each clip in order with the set transitions.
Note:
If you want to use mix transitions between the clips in the Play List you must use two channel transports. Depending on the channel
transport you select, the following channel transport is used for preview.
1.
Double-click on the playlist you want to air in the Clip Library.
2.
Select the channel transport that you want to play the Play List on.
Tip:
Select a channel (ChA or ChC) if you want to use a mix transition. Channels B and D are used as the preview channels for ChA
and ChC.
3.
Click
AIR List
on the Playlist Editor window.
The Playlist Editor window changes to the PLAYLIST ON-AIR window, and the first clip in the Play
List is highlight red and is loaded into the selected channel transport.
4.
If you want to dissolve (mix) from one clip to the next in the Play List select the transition channels
(
ChB > ChA
,
ChD > ChC
). If not selected, the Play List will cut from one clip to the next.
You are prompted whether you want to load the list in PGM/PVW mode. Click
Yes
. The next clip in
the Play List (highlighted green) is loaded into the second (PVW) channel transport.
5.
Click play (
) to start playing the Play List.
Tria Express DUET User Manual (v01) — Clip Library • 57