Server Configuration
The Tria Config application allows you to configure various aspects of the hardware in your server.
The number of channels and inputs and outputs you have depend on the hardware installed in your
server.
Important:
Not all settings are available on all servers or require a option to be purchased or installed.
Channel Setup
The hardware channels can be set up in a number of ways, depending on the task you need the server
to perform. These configurations are applied to all the channels in a group (ChA-D) and can be used for
simple background video, keyed video, MultiScreen, Stereoscopic 3D, instant replay (2D).
Table 1: Video-Only / Video+Key Modes
Description
Mode
Four (4) background channel transports (no alpha).
V V V V (Mix)
Two (2) keyer channel transports (video+alpha). Channel A carries the video and channel C carries
the alpha for the first key and channel B carries the video and channel D carries the alpha for the
second key.
VK VK (Mix)
One (1) keyer channel transport (video+alpha) and two (2) background channel transports. Channel
A carries the video and channel B carries the alpha. This configuration also allows the two video
(V) channels to playout a Play List with mix transitions.
VK V V (Mix)
Two (2) keyer channel transports (video+alpha). Channel A carries the video and channel B carries
the alpha for the first key and channel C carries the video and channel D carries the alpha for the
second key.
VK VK
One (1) keyer channel transport (video+alpha) and two (2) background channel transports. Channel
A carries the video and channel C carries the alpha.
VK V V
Two (2) background channel transports and one (1) keyer channel transport (video+alpha). Channel
B carries the video and channel D carries the alpha.
V V VK
Two (2) background channel transports and one (1) keyer channel transport (video+alpha). Channel
C carries the video and channel D carries the alpha.
V V VK (Mix)
Table 2: ISO Modes
Description
Mode
Two (2) 2D cameras are recorded to the same clip ID on channels A and B. Channels C and D are
the playback channels.
ISO2 + V V (Mix)
Three (3) 2D cameras are recorded to the same clip ID on channels A-C. Channel D is the playback
channel.
ISO3 + V
Four (4) 2D cameras are recorded to the same clip ID. There are no playback channels.
ISO4
Two (2) 2D cameras are recorded to the same clip ID on channels A and C, and another two (2)
2D cameras are recorded to the same clip ID on channels B and D.
ISO2 + ISO2 (Mix)
Two (2) 2D cameras are recorded to the same clip ID on channels A and B, and another two (2)
2D cameras are recorded to the same clip ID on channels C and D.
ISO2 + ISO2 (Time-Slip Record
+ Playback)
Channels A and B are the playback channels, and two (2) 2D cameras are recorded to the same
clip ID on channels C and D.
V V (Mix) + ISO2
Two (2) 2D cameras are recorded to the same clip ID on channels A and B and channels C and D
make one (1) keyer channel transport (video+alpha).
ISO2 + VK
12 • Server Configuration — Tria Express DUET User Manual (v01)