3.
In the
Router Protocol
area, select the protocol you want to use to communicate with the router.
•
Probel SW-P-08
— select this option of your router uses the Snell Advanced Media
®
SW-P-08
protocol.
•
Quartz
— select this option if your router uses the Evertz
®
Quartz protocol.
4.
In the
Router Levels
field, select the number of levels that the router is using.
5.
In the
Router IP Address
field, enter the IP address of the router you want to control.
6.
In the
Router Port Number
field, enter the port on the router you want to connect to.
7.
Click
Connect to Router
to connect to the router.
8.
In the
Video Router Destinations
area, select which destinations on the router are connected to
each video channel input on the server. This is the physical connection from one BNC to the other.
9.
In the
Change Router Sources
area you can change which sources are being routed to the destinations
that are assigned to each video channel input on the server.
10.
Click
Apply
.
Audio Setup
You can select the number of audio tracks to record, which sources audio will use, and which audio
channel to monitor from the analog audio out headphone jack. The number of AES digital audio inputs
and outputs depends on the model of server you purchased.
To Configure the Audio Setup
Select the number of tracks to record and which tracks are sent to the headphones jacks.
1.
Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
2.
Click the
Audio
tab.
Tria Express DUET User Manual (v01) — Server Configuration • 15