8.
Click on the tab for the channel output into which you want to route audio tracks.
9.
In the
ChX Audio Output Track 1
row, select the source channel player (
ChX Player
) and the audio
track (
Track #
) from the player that you want to route to track 1 of the output video stream.
10.
Repeat this step for all of the remaining output tracks and channel outputs.
Tip:
Click NORMANIZE ALL ChX Output Routes to reset all the player audio track to their default output track assignment.
11.
Click
Apply
.
Timecode Setup
The timecode information can be overlayed on the output video stream of the server. This can be time
of day LTC coming into the server, or the embedded timecode in the video signal being recorded.
Important:
When you turn the timecode overlay on, it is shown over the image on the video output.
To Configure the Timecode
The timecode information can be overlayed on the output video stream of the server.
Note:
The timecode overlay is only on the video output and will not appear in the recorded video.
1.
Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
2.
Click the
Timecode
tab.
18 • Server Configuration — Tria Express DUET User Manual (v01)