Ross openGear GPI-8941 Series, User Manual

Page: 50 / 92

50 • Configuring the GPI Inputs GPI-8941 User Guide (v9.0)
6. Use the Toggle menu to specify how the GPI Input will assert. Choose from the following:
• No Toggle — Select when you want to assert a particular state for a GPI Input where High is ON and Low is
OFF.
• Toggle Leading Edge —When the GPI Input state is OFF, a toggle from Low-to-High will set the state to
ON. The next toggle from Low-to-High will change the state to OFF.
• Toggle Trailing Edge — When the GPI Input state is OFF, a toggle from High-to-Low will set the state to
ON. The next toggle from High-to-Low will change the state to OFF.
7. Use the Toggle Power Up menu to determine the state of the GPI Input after a card power cycle.
8. Repeat steps 4 to 7 for each GPI input you wish to configure.