Ross openGear GPI-8941 Series, User Manual

Page: 78 / 92

78 • RossTalk Protocol GPI-8941 User Guide (v9.0)
Get the module type using mixed verbose and terse. Verbose message return is off.
Session Control
These commands and responses allow the session characteristics to be set up and queried.
Message Auto-Response Control
This command controls whether an automatic response is sent after configuration messages. A response to this
configuration command is sent automatically if the session auto-response is on or if Parameter 4 is a status request.
Examples
Turn auto-response off.
Response:
GPI ModuleStatus:Type:GPI-8941
GPI ModuleStatus:Inputs:16
GPI ModuleStatus:Outputs:16
Command:
GPI modulequery: t
Response:
GPI M:T:GPI-8941
Parameter
Description
Terse Verbose
Command
1 GPI GPI GPI command/message class
2 S SessionConfig Session setup query command
3 A AutoResponse Auto-response control
4 0 off Turn auto-response off (zero or off)
1 on Turn auto-response on (one or on)
? StatusReq Request current auto-response setting
Response
1 GPI GPI GPI command/message class
2 S SessionStatus Session setup status message
3 A AutoResponse Auto-response control
4 0 off Auto-response is off
1 on Auto-response is on
Command:
GPI S:a:0 (terse format)
GPI SessionConfig : AutoResposne : Off (verbose format)
Response:
none