Ross openGear GPI-8941 Series, User Manual

Page: 68 / 92

68 • DashBoard Menus GPI-8941 Series User Guide (v9.0)
Control Tab
Table 15.15 summarizes the options in the Control sub-tab.
RossTalk Report No Reports No RossTalk reports are generated for this GPI
Report Both Edges When the GPI output state is changed, a RossTalk report
is sent
Leading Edge Only When the specified GPI output transitions form Low to
High a RossTalk report is sent
Trailing Edge Only When the specified GPI output transitions from High to
Low a RossTalk report is sent
GPINet Report No Reports No GPInet reports are sent for this output
Report Both Edges When the specified GPI output transitions a GPInet
report is sent.
Table 15.15 Control Menu Items
Item Parameters Description
GPI #
Conn (read-only) x-y Indicates the output pair on the rear module. For
example
Con 2-12
indicates Pair 12 on the second
connector of the rear module.
State (read-only) Off Indicates the specified GPI is not active
On Indicates the specified GPI is active
Command Select The Command field displays this message when no
parameter is selected
Off For maintained outputs, sets the output to off.
For Pulse and Re-triggered Pulse outputs, this is
ignored.
On For Maintained outputs, this sets the output to on.
For Pulse or Re-triggered Pulse outputs, this starts the
pulse.
Trigger For Maintained outputs, this sets the output to on and
then the output will automatically go off after the Pulse
Width time.
For Pulse or Re-triggered Pulse outputs, this starts the
pulse.
Disabled The Command field displays this message when the
Dashboard Control is set to Not Allowed (user input is
ignored)
DashBoard
Control Not Allowed The GPI ignores Off, On, and Trigger commands from
Dashboard. The Command field displays
Disabled
.
Allowed The specified GPI Output acts on any commands sent
via a DashBoard client
Table 15.14 Report Menu Items
Item Parameters Description