Ross openGear GPI-8941 Series, User Manual

Page: 46 / 92

46 • Setting up Remote Control GPI-8941 User Guide (v9.0)
4. Select the Product tab.
5. Verify that the Software Rev field reports a version of 2.92 or higher.
In the example provide in 3, the card reports a version of 3.00.
Verify the Default Port Speed for the GPI-8941Card
Ensure that the Default Port Speed for the GPI-8941 card is set to 100Mb/s on the MFC-OG3-N or MFC-OGX-N.
To verify the Default Port Speed for the GPI-8941 card
1. Display the MFC-OG3-N or MFC-OGX-N window as outlined in steps 1 to 3 of the procedure “ To verify the
MFC-OG3-N or MFC-OGX-N software version ” on page 45.
2. Select the Network tab.
3. Locate the slot for the GPI-8941 card in the Ethernet Switch area of the Network tab.
4. Verify that the Force Port Speed field for the slot is set to 100Mb/s.
Verify the IP Address of the GPI-8941 Card
Ensure the GPI-8941 card has a valid IP address assigned to it. Check that network address is valid for your
installation.
To verify the IP Address of your GPI-8941 card
1. Display the GPI-8941 card interface in DashBoard as outlined in “ To access the GPI-8941 in DashBoard ” on
page 35
2. Select the Network tab.
3. Verify the Current Network Settings fields are reporting the correct information.
4. To update the network settings for your GPI-8941 card:
a. Contact your IT Department to obtain a valid IP address.
b. Follow the instructions given in “ Assigning an IP Address to the Card ” on page 37.