Ross openGear GPI-8941 Series, User Manual

Page: 67 / 92

GPI-8941 Series User Guide (v9.0) DashBoard Menus • 67
Report Tab
Table 15.14 summarizes the options in the Report sub-tab.
Polarity Normal Sets the polarity of the output. Normal polarity has a
Low-to-High transition starting the pulse.
Inverted Sets the polarity of the output. Inverted polarity has a
High to Low transition starting the pulse.
Power Up State Off Set the specified GPI output to OFF after a card power
cycle
On Set the specified GPI output to ON after a card power
cycle
Last State Set the specified GPI output to the last known state
before the card power cycle
Pulse Width 20-30000 Specifies the number of milliseconds the pulse will
occur
Output Maintained The output is level based. The output will be High for
ON and Low for OFF.
Pulse The GPI will generate a pulse when triggered. Further
triggers are buffered until the pulse has completed.
Re-trigger Pulse The GPI will generate a pulse when triggered. If the GPI
receives anther trigger before the end of the pulse, the
pulse will be extended by the Pulse Width time.
Timing Immediate The GPI will change state immediately upon receiving a
trigger.
The settings in the Timing Window Setup menus are
ignored.
Synced When a trigger is received, the GPI will wait until the
timing window before changing state.
The settings in the Timing Window Setup menus are
applied.
Table 15.14 Report Menu Items
Item Parameters Description
GPI #
Conn (read-only) x-y Indicates the output pair on the rear module. For
example
Con 2-12
indicates Pair 12 on the second
connector of the rear module.
State (read-only) Off Indicates the specified GPI is not active
On Indicates the specified GPI is active
Table 15.13 Setup Menu Items
Item Parameters Description