Bank C-C: Forced Black
This selection forces the output to black (SDI). Use the following steps to enable or disable the Forced
Black mode:
1. Select Bank C, and rotate
Function Select
to position C.
2. Select the desired mode according to the table below:
•
Toggle
Mode Select
up and hold for one second
to force the output to
black.
•
Toggle
Mode Select
down
to disable the Forced Black mode.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label
Default
C
C
+ (h) On
- Off
FRCD BLK ON
OFF
OFF
Bank C-D: Forced Mono
This selection forces the output to monochrome (SDI). Use the following steps to enable or disable
the Forced Monochrome mode:
1. Select Bank C, and rotate
Function Select
to position D.
2. Select the desired mode according to the table below:
•
Toggle
Mode Select
up and hold for one second
to force the output to
monochrome.
•
Toggle
Mode Select
down
to disable the Forced Monochrome mode.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label
Default
C
D
+ (h) On
- Off
FRCD MONO ON
OFF
OFF
4-22
•
Using Banks
ADC-8032A User Manual (Iss. 04)