Using Bank A Functions
The following topics are discussed in this section:
•
Heads-up Display
•
Video Gain
•
Black Level Offset
•
Chroma Gain
•
Hue
•
C
B
Gain
•
Chroma AGC
•
Factory Defaults
•
Lock/Unlock Switch Access
Important
The card defaults with switch access set to the locked position.
To unlock the access refer to the “
Bank A-F: Lock/Unlock
Switch Access
” section in this chapter before attempting to
make any adjustments.
Bank A-1: Heads-up Display
Use the following steps to enable or disable the Heads-up display:
1. Select Bank A, and rotate
SW1
Function Select
to position 1.
2. Choose the desired display mode:
•
Hold
Mode Select
up
for one second to enable the display.
•
Hold
Mode Select
down
to disable the display.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label Default
A 1
+
(h)
On
- Off
HEADS UP ON
OFF
OFF
Note
The display is superimposed over all ADC-8032A video
outputs. Do not use this feature with “on-air” signals.
4-6
•
Using Banks
ADC-8032A User Manual (Iss. 04)