Using Banks
In This Chapter
This section provides a detailed explanation on using Bank functions. The following topics are
discussed:
•
General Operating Rules
•
Selecting Banks
•
Using Bank A Functions
•
Using Bank B Functions
•
Using Bank C Functions
•
Timing Modes
General Operating Rules
Please note the following important operating rules for the ADC-8032A:
•
Whenever the card is powered up, it defaults to Bank A, and the Bank A
LED is lit.
Note
The card defaults with switch access set to the locked position.
To unlock the access refer to the “
Bank A-F: Lock/Unlock
Switch Access
” section in this chapter before attempting to
make any adjustments.
•
For each of the supported video formats (NTSC / PAL / PAL-M / PAL-N) the card
stores the default or user-adjusted video settings independently in non-volatile
memory. The selection of settings is determined by the setting of
JP5
Input select
,
the video standard jumper.
•
Always check to see that the
Input OK
LED is lit. If not, check that the inputs are
valid. If a reference is used, check that the reference is valid and that the reference
standard matches the input standard.
•
Before making adjustments, choose the method that you wish to use. Three methods
are available:
ADC-8032A User Manual (Iss. 04)
Using Banks
•
4-1