•
If you wish to obtain the reference directly from the card’s back plane, connect
a composite analog color black reference to BNC
8
. Be sure that pins
2-3
(
O/P8
) are shorted on Jumper
JP3
. Please refer to the previous section entitled,
“
Jumper Setup”.
Note
BNC
8
is terminated at 75-ohms on the card.
•
If you wish to reference the card from the frame’s Master Reference connector,
ensure that a composite analog color black reference signal is connected to the
REF BNC on the frame (see Figure 6 in chapter 5). Be sure that Jumper
JP3
is
set to pins
1-2
(
Frame
).
2-4
•
Installation and Setup
ADC-8032A User Manual (Iss. 04)