Using Bank B Functions
The following topics are discussed in this section:
•
Setup
•
VI Blanking
•
VI End
•
SuperBlack
•
V Bit Lock
Bank B-1: Setup
Use the following steps to enable or disable setup:
1. Select Bank B, and rotate
Function Select
to position 1.
2. Choose the desired setup value:
•
Toggle
Mode Select
up
to enable NTSC / PAL-M setup.
•
Toggle
Mode Select
down
to disable NTSC / PAL-M setup.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label Default
B 1
+
On
- Off
SETUP ON
OFF
ON*
OFF**
* Indicates default NTSC / PAL-M setting
** Indicates default PAL / PAL-N setting
Bank B-3: VI Blanking
Use the following steps to blank the vertical interval, or allow the signals in the vertical interval to
pass through the
ADC-8032A
:
1. Select Bank B, and rotate
Function Select
to position 3.
2. Choose the desired blanking mode:
•
Toggle
Mode Select
up
to blank the vertical interval.
•
Toggle
Mode Select
down
to pass the vertical interval.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label Default
B 3
+
Blank
- Pass
Through
VI BLANK BLANK
PASS
PASS
ADC-8032A User Manual (Iss. 04)
Using Banks
•
4-11