28 -
PAT.
PAT.
R
R
S.R.
PAT.
PAT.
• CHANGING THE GAS TYPE :
the calorific power output and gas pressure will vary
according to the gas supply.
When changing gas type, you must follow the procedure below :
. fit the correct jets
(see table below),
. adjust the minimum flame on the taps
(see page 33).
CHANGING THE JETS :
each jet is designated by size.
To gain access to the jets :
. remove the pan supports,
. remove the burner cap and body,
. using the spanner supplied with the appliance, unscrew the jet,
. fit the correct jet for the type of gas to be used,
. secure the jet tightly,
. replace the burner body, cap and the pan support.
INSTALLATION: "GAS CONNECTION"
Jet
Fast burner body*
Semi-fast burner body*
