- 43
• PROGRAMMING A COOKING ZONE
Every cooking zone can be programmed for a maximum of 99 minutes.
. Press on the on/off button of the hob.
. Start the required zone required by following the previous instructions.
. Press on the Timer button of the zone required, the control led blinks above the
display.
. Press on the "+" or "-" button to choose a time in minutes.
. The programmed time can be modified at any moment by reactivating the Timer button.
The Timer control led must blink ; it indicates that the modification is for the timer.
When the time has run, the cooking zone goes off automatically and an audible beep
sounds for 1 minute. To stop it press the Timer button, the control led disappears.
. To change the heat level, when the timer is operating, the control led above the display
must be fixed. If not, press again the Timer button.
. The programmed time can be reset to "00" using the "-" button or pressing the "-" or
"+" buttons at the same time, press the Timer button to stop the control led.
. The timer can be used alone as reminder, it will ring at the end of the programmed
time.
Caution : In order to avoid a hazard due to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
