- 47
The hob is not operating.
The hob does not cut off.
The hob stops automatically
Frequency of on/off operations for
cooking zones
“H” display, residual heat
indicator, blinking.
• A big spill or object covers at least two buttons, for at
least 10 seconds. Clean up the spill or remove the object.
• The control panel is locked. Press the “Locking” button
to release.
• The control panel is locked. Press the “Locking” button
to release.
• A spill covers at least two buttons for more than 10
seconds; the hob switches to safety, and an audible beep
sounds. Clean up the spill or remove the object.
• The cooking zones stop automatically if they are left
on for too long. See chapter p 40.
• The on-off cycles vary according to the required heat
level:
- low level: short operating time,
- high level: long operating time.
• The electronic temperature is too high. A technician
should verify the fitting in compliance with the
recommendations, page 29 & 30.
PROBLEMS AND SOLUTIONS
