32 -
INSTALLATION - ELECTRICAL CONNECTION
The mains electricity supply connected to the appliance should comply with the norms in force
in the country of installation.
The ROSIERES company does not accept any responsibility if this provision is not complied with.
Connection to the mains electricity supply should be through a socket with an earth terminal,
or through an intermediary switching device with a gap between contacts of at least 3 mm. The
power supply unit must be protected by appropriate fuses and use cables of a large enough
cross section to provide a normal supply to the appliance.
The hob is fitted with a power supply cable* which allow it to be connected only to a power
supply of 230 V between phases, or between phase and neutral.
• Connect to a socket. Before connecting, it is compulsory to check :
. the power supply voltage shown on the electricity meter,
. the adjustment of the circuit breaker, and
. the fuse rating 20A.
Note : the socket must be reachable for any eventual repair. Take care of its location
at the time you install the hob.
Warning : before proceeding with the connection, check the continuity of
the earthing of the power supply unit.
We cannot be held responsible for any accident which has resulting from the
use of an appliance which is not connected to earth, or whose earthing is
defective.
* The eventual replacement of the supplying cord must be carried on by the After Sales
Service or by an agreed engineer, with a cord whose characteristics must be similar to the
original one.