36 -
USE - THE GAS BURNER
Each burner is contolled by a tap with progressive settings allowing :
* a wider choice of settings from the maximum position to the lowest and most precise one,
* easier flame regulation according to the pan diameter,
* no risk of cutting off the flame or switching off when the flame is turned down quickly.
Each burner is fitted with :
. an automatic ignition, and,
. a thermocouple safety device allowing the automatic cut-off of the gas in case the flame
dies out accidentally.
USE :
• Turn on the gas tap,
• A symbol next to each control knob indicates which burner is lit.
• Press and turn the knob to position "+" keeping it pressed to produce sparks which
in turn ignite the burner. Keep the pressure on the control knob a few seconds to
permit the releasing of the safety device.
• Set the flame according to your cooking requirements.
Intermediate positions are available between the "+" and "-" settings on the control
knob.
• To turn the flame out, turn the control knob back to stop position.
Please note :
. if there is a power cut, the burner can be ignited by pressing in and turning the knob
to position "+" and holding a naked flame to the burner.
. when the flames goes off accidentally, you simply process a new ignition according to the
instructions mentionned above.
