SLF 2250/4000
Hydromatic Stinger
Page - 97 -
© 2014
Maintenance
Service Procedures
Service and repair procedures must be done by specialists.
These activities must be performed according to manufacturer set
intervals.
ATTENTION !
Obey all operation and service manuals of chassis, optional
equipment and apparatus carried in the vehicle unconditionally.
Negligence can cause damage and ultimately, loss of warranty.
Observe service intervals and officially ordered terms and note
executed jobs in a report.
Service procedures - Lubrication of pump gearbox *
Always drain the oil while the housing is warm, as the oil will flow
freely and will carry foreign particles with it.
For drainage, remove the oil drain plug (82).
After reinstalling the drain plug (82), remove the oil level plug (84)
and fill with oil. Correct oil level is achieved when the oil is level
with the bottom of the oil level plug opening, reinstall oil level plug
(84) when oil level is correct.
Oil change: after 50-100 working hours
at least every two years
Oil quantity:
7.2 ltr.
Oil type:
SAE 90 transmission oil
API / GL 4
MIL-L-2105
ATTENTION !
For oil change, please obey current disposal regulations.
81
oil filler plug
82
oil drain plug
84
oil level plug
84
81
82
