Page - 92 -
© 2014
SLF 2250/4000
Hydromatic Stinger
Maintenance
Checking Procedures
Checking procedures may be done by fire brigade personnel
familiar with the vehicle and pumping system.
These activities must be performed after each operation to ensure
optimal reliability of the vehicle.
- Check all locks, holding devices and equipment for good
condition and safe support.
Any discrepancies, defects or faults should be immediately
corrected or repaired.
CAUTION !
Equipment improperly prepared for operation is unsafe for use. If
something is noticed and requires attention, have it checked before
it leaves for operation. Even minor mechanical defects can lead to
accidents or personal injury.
Pay attention to the operation manuals of equipment and appara-
tus carried in the vehicle.
CAUTION !
Bevor starting any operation on the vehicles roof alway install all
deliverd as desired roof rails to there dedicated brackets - danger
of falling !
