SLF 2250/4000
Hydromatic Stinger
Page - 109 -
© 2014
Maintenance
Handling and Storing Electronic Components
(DRE and Electronics)
Storing, packing, and transporting
Electronics with Housing:
To protect them against soiling and climatic effects, a plastic foil
must be used when packaging. Sufficient filling material must be
used to avoid mechanical damage during shipment of unit. Precau-
tions regarding anti-electrostatic problems are not necessary.
Printed Cards/chip boards:
Components like printed cards must be properly packed (wrapped)
into anti-electrostatic foil !
Printed cards are extremely sensitive to mechanical damage and
therefore boxes, sufficient in size, with ample filling material must
be used for shipment/transport.
Shipment in “Jiffy-Bags” is not permissible.
The same recommendations apply when carrying these items in
tool boxes etc.
General Requirements:
Maximum permissible limits for storage and transportation are as
follows:
Temperature: -40
°
Celsius to +100
°
Celsius
Humidity: 20 % up to 95 %
It is essential to store electronic components either packed in
protection foil (electronics with housing), or packed in anti-
electrostatic foil (printed cards).
Working on vehicles with electronic equipment:
Installation jobs and test works:
Before carrying out work on electric components and electronics
(except test procedures), switch off power supply (master switch in
position “OFF” or disconnect battery).