SLF 2250/4000
Hydromatic Stinger
Page - 27 -
© 2014
3/4
1/2
1/4
3/4
1/2
1/4
Operation display in driver´s cabin - main display
After engaging the ignition or pressing switch (S320) the main
menu screen will be shown on display (N6).
Note:
The acoustical warning tone triggered by 25% and 10% water or
foam agent levels can be cancelled by pressing switch (S319).
The main menu shows the various warning symbols which indicate
the open/close status of the shutters, doors, rear hatch and cabin
doors. Important tank (water, foam compound, diesel*) levels,
warning lights, rear view lights and surrounding field illumina-
tion, etc. are also shown.
The following indications are displayed in the information sector
on the left and right sides:
H1
pilot lamp: indicates engaged optical warning system
H1/1 pilot lamp: indicates operation status of public address
system - active if optical warning system is engaged
H6
pilot lamp: indicates open doors or shutters
H8
pilot lamp: indicates an engaged P.T.O.
H16
OK to drive lamp: indicates with "OK" or "STOP" if all
doors are closed, P.T.O. is off, alternator disengaged,
traffic indicator lamp is off, light mast in transport position,
roof turret in transport position or the surrounding field
illumination is off.
If for any of the afore mentioned "STOP" is displayed, and
the handbrake is released, a warning will sound, which can
be silenced by pressing switch (SF1).
When the fault is solved, the display will change from
"STOP" to "OK", meaning it is okay to drive.
H71
pilot lamp: indicates roof turret not in transport position
H101 pilot lamp: indicates external power supply connected
H118 pilot lamp: indicates extended roof railing
H205 pilot lamp: Stinger not in transport position
H210 pilot lamp: extending legs not in transport postition
P1
water tank level gauge
P2
foam compound tank level gauge
SF1
SF2
SF3
N6
SF4
S319
H101
H1
SF5
H6
H16
H71
S320
H210
H205
H118
P1
Technical Description
P2
H8 H1/1
