Page - 6 -
© 2014
SLF 2250/4000
Hydromatic Stinger
Technical Data
Chassis
Manufacturer and type:
Scania G480 LB RHD
Engine:
Scania DC 13 07 Euro 5
Performance:
352 kW at 1800 rpm
Voltage of consumers:
24 Volt
Batteries:
2 x 12 Volt / 180 Ah
Generator:
28 Volt / 150 Ampere
Transmission:
Allison HD4500
Power Take Off (P.T.O.) I:
Chelsea 870C for the hydr. oil pumps
Ratio:
n
engine
x 1.33
Rotating direction:
counterclockwise
Performance:
175 kW at 1800 rpm
(engine speed)
Torque:
698 Nm
Power Take Off (P.T.O.) II: N 100 for water pump
Ratio:
n
engine
x 1.28
Rotating direction:
counterclockwise
Torque:
1700 Nm
Wheel base:
5700 + 1350 mm
Tyres:
315/80 R 22.5
Powered axle:
8 x 4
Cabin:
1 + 1 men
Dimensions:
Length ......................... 11600 mm
Width ............................ 2510 mm
Height ........................... 3800 mm
Permissible weight:
Front axle I ......................... 7100 kg
Front axle II ........................ 7100 kg
Rear axle I ........................ 10500 kg
Rear axle II ....................... 10500 kg
Gross vehicle weight .......... 35200 kg
Ramp angles:
Angle of approach ..................... 18
°
Ramp angle .............................. 15
°
Angle of departure ..................... 11
°
Technical Data
ATTENTION !
Always use similar tyres when chang-
ing or replacing a tyre to allow maxi-
mum driving performance!
It is strictly prohibited to use retreaded
tyres.
When changing the tyre type call for
written approval from Rosenbauer.
ATTENTION !
The vehicle should be operated by
trained and certified personnel.
When driving on inclines, uneven or
slippery roads / surfaces, as well as
during cures or expecting a lane change,
a prudent and precautionary driving
style should be used.
The instructions in the chassis opera-
tors manual should be strictly followed,
in particular when driving in off-road
conditions.
For further technical data please refer
to the chassis manufacturers manual.
